Features:
01 This machine mechanical, pneumatic, electrical integration. Each action program controlled by the PLC. Touch-screen operation, simple and convenient.
02 servo motors sheet feeding, stepless adjustment of length, speed accuracy and stability.
03. Adapt with ordinary plastic machine, vacuum forming machine connections are trimmed.
04. Cutting using laser cutter mold, the lower the cost.
05. Using die cutting technology shift, little can be achieved without cutting plastic products, in line with most of the food packaging requirements.
06. Cutting clamping down with full servo drive, fast and precise clamping stroke.
07. Robot sucked out barrier stack, saving labor costs, reduce labor intensity.
08. Using quick die change equipment, pneumatic clamping.
Technical parameters:
Maximum cutting area (mm2) Max Cutting Area | 400 × 760 |
Adapt sheet thickness (mm) Thickness | 0.3-1.5 |
Adapt sheet width (mm) Suitable Sheet | 500-800 |
Maximum cutting force (ton) Cutting Press Clamping Force | 45 |
On the stroke (mm) Up Mould Stroke | 80 |
Under Stroke (mm) Down Mould Stroke | 110 |
Maximum product height (mm) Max Allowable Height | 70 |
Maximum depth articles (mm) Max Allowable Depth | 100 |
Operating frequency (beats / min) Capacity (Cycle / min) | 30 |
Gas source (outside with) Gas Source gas volume (m3/min) Air Vol. | ≥ 0.3 |
Pressure (MPa) | 0.8 |
Power | three-phase four-wire 380V / 220V 50Hz |
Motor power | 19 |
Machine maximum power (kw) General Power | 21 |
Maximum dimensions (L × W × H) (mm) | 4500 × 3100 × 2900 (including motor height) |
Total Weight (kg) Weight | 5500 |
Technical configuration:
Programmable Logic Controller (PLC) | Taiwan Delta |
10.4 inches color touch screen Touch Screen Monitor (10.4 "inch / Color) | Taiwan Delta |
Sheet feeding servo motor (1.0kw) Feeding servo | Taiwan Delta |
The mold servo motor (5.5kw) Up mold servo | Taiwan Delta |
Lower die servo motor (4.5kw) Down mold servo | Taiwan Delta |
AC contactor | Germany Siemens |
Thermal relay | Germany Siemens |
Intermediate relay | Germany Weidmuller |
pneumatic components | Japan SMC |
Cylinder | CHINA |