1. Electric system: Mitsubishi PLC system and human-machine interface control(Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: The girder arm, tripod position, central mold-lock clamping unit. Durable in use. Mold-lock pressure is balance. No deformation. Ball linear guide rail. It is high precision, low resistance and high speed.
6. Blow pin holder: The whole triangle blow pin holder. Steady and no moving. Make sure the smoothness of the cutter of product.
7. Clamping unit and mold-lock system use the TONGDA patent: Holding elbow type. Double linear ball rolling guide way and microns accuracy. High precision, low resistance, high speed, energy saving, high intensity, and no deformation. All the movements are controlled by servo valve.
8. Deflashing system: Independent system. Reduce the cycle time and increase efficiency.
9. Twice cooling system: Make the shape of product be better.
|
| HSII-12L |
| Max.Product Volume | (L) | 12 |
| Station |
| Double |
| Dry cycle | (pc/h) | 700*2 |
| Screw Diameter | (mm) | 90 |
| Screw L/D ratio | (L/D) | 25 |
| Screw drive power | (KW) | 37 |
| Screw heating power | (KW) | 9.1 |
| No.of heating zone (Screw) | (ZONE) | 3 |
| Output of HDPE | (kg/h) | 130 |
| Hydraulic pump driving power | (KW) | 15 |
| Clamping force | (KN) | 158 |
| Platen distance | (mm) | 270-620 |
| Mold moving stroke | (mm) | 600 |
| Max.Size of Mold | (W*H) （mm） | 590*500 |
| Max.Die diameter (Single-head) | （mm） | 220 |
| Die heating power(Single-head) | （KW） | 9.1 |
| No.of heating zone (Single-head) | （ZONE） | 3 |
| Central distance of Bi-head | （mm） | 240,260 |
| Max.Die diameter (Bi-head) | （mm） | 145 |
| No.of heating zone (Bi-head) | （ZONE） | 5 |
| Heating power (Bi-head) | （KW） | 15 |
| Blowing pressure | （Mpa） | 0.6 |
| Air consumption | （M³/MIN） | 0.8 |
| Cooling water pressure | （Mpa） | 0.3 |
| Water consumption | （L/MIN） | 60 |
| Size of machine | （L*W*H）（ m） | 4.9*3.1*3.2 |
| Weight of machine | （TON） | 15 |
