

1. Electric system: Mitsubishi PLC system and human-machine interface control(Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: The girder arm, tripod position, central mold-lock clamping unit. Durable in use. Mold-lock pressure is balance. No deformation. Ball linear guide rail. It is high precision, low resistance and high speed.
6. Blow pin holder: The whole triangle blow pin holder. Steady and no moving. Make sure the smoothness of the cutter of product.
7. Clamping unit and mold-lock system use the TONGDA patent: Two pull rod, single cylinder, two-way synchronous clamping central mold-lock system. It is very steady. Linear ball rolling guide way and microns accuracy. High precision, convenience, energy saving and no deformation.
8. Deflashing system: Independent system. Reduce the cycle time and increase efficiency.
|
| HTS-2L | HTSII-2L |
Max.Product Volume | (L) | 2 | 2 |
Station |
| Single | Double |
Dry cycle | (pc/h) | 900 | 900*2 |
Screw Diameter | (mm) | 50 | 60 |
Screw L/D ratio | (L/D) | 25 | 25 |
Screw drive power | (KW) | 11 | 15 |
Screw heating power | (KW) | 6 | 9.7 |
No.of heating zone (Screw) | (ZONE) | 3 | 3 |
Output of HDPE | (kg/h) | 50 | 60 |
Hydraulic pump driving power | (KW) | 5.5 | 5.5 |
Clamping force | (KN) | 40 | 40 |
Platen distance | (mm) | 138-368 | 138-368 |
Mold moving stroke | (mm) | 370 | 370 |
Max.Size of Mold | (W*H) (mm) | 300*320 | 300*320 |
Capacity of Accumulator head | (L) |
|
|
Max.Die diameter (Single-head) | (mm) | 108 | 108 |
Die heating power(Single-head) | (KW) | 5.2 | 5.2 |
No.of heating zone (Single-head) | (ZONE) | 3 | 3 |
Central distance of Bi-head | (mm) | 130 | 130 |
Max.Die diameter (Bi-head) | (mm) | 72 | 72 |
No.of heating zone (Bi-head) | (ZONE) | 5 | 5 |
Heating power (Bi-head) | (KW) | 7 | 7 |
Blowing pressure | (Mpa) | 0.6 | 0.6 |
Air consumption | (M3/MIN) | 0.4 | 0.4 |
Cooling water pressure | (Mpa) | 0.2-0.3 | 0.2-0.3 |
Water consumption | (L/MIN) | 35 | 35 |
Size of machine | (L*W*H)( m) | 2.78*1.55*2.35 | 3.2*2.12*2.55 |
Weight of machine | (TON) | 4 | 6 |