

1. Electric system: Mitsubishi PLC system and human-machine interface control(Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: The girder arm, tripod position, central mold-lock clamping unit. Durable in use. Mold-lock pressure is balance. No deformation. Ball linear guide rail. It is high precision, low resistance and high speed.
6. Blow pin holder: The whole triangle blow pin holder. Steady and no moving. Make sure the smoothness of the cutter of product.
7. Clamping unit and mold-lock system use the TONGDA patent: Two pull rod, single cylinder, two-way synchronous clamping central mold-lock system. It is very steady. Linear ball rolling guide way and microns accuracy. High precision, convenience, energy saving and no deformation.
8. Deflashing system: Independent system. Reduce the cycle time and increase efficiency.
|
| HTS-5L | HTSII-5L |
Max.Product Volume | (L) | 5 | 5 |
Station |
| Single | Double |
Dry cycle | (pc/h) | 700 | 700*2 |
Screw Diameter | (mm) | 70 | 80 |
Screw L/D ratio | (L/D) | 25 | 25 |
Screw drive power | (KW) | 22 | 30 |
Screw heating power | (KW) | 12.7 | 17.6 |
No.of heating zone (Screw) | (ZONE) | 3 | 4 |
Output of HDPE | (kg/h) | 70 | 110 |
Hydraulic pump driving power | (KW) | 11 | 11 |
Clamping force | (KN) | 110 | 110 |
Platen distance | (mm) | 148-508 | 148-508 |
Mold moving stroke | (mm) | 450 | 450 |
Max.Size of Mold | (W*H) (mm) | 440*420 | 440*420 |
Max.Die diameter (Single-head) | (mm) | 145 | 145 |
Die heating power(Single-head) | (KW) | 7.6 | 7.6 |
No.of heating zone (Single-head) | (ZONE) | 3 | 3 |
Central distance of Bi-head | (mm) | 160,180 | 160,180 |
Max.Die diameter (Bi-head) | (mm) | 108 | 108 |
No.of heating zone (Bi-head) | (ZONE) | 5 | 5 |
Heating power (Bi-head) | (KW) | 10.7 | 10.7 |
Blowing pressure | (Mpa) | 0.6 | 0.6 |
Air consumption | (M³/MIN) | 0.4 | 0.4 |
Cooling water pressure | (Mpa) | 0.2-0.3 | 0.2-0.3 |
Water consumption | (L/MIN) | 50 | 60 |
Size of machine | (L*W*H)( m) | 3.43*1.77*2.58 | 4.10*2.60*2.70 |
Weight of machine | (TON) | 5 | 8 |