

1. Electric system: Mitsubishi PLC system and human-machine interface control(Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: The girder arm, tripod position, central mold-lock clamping unit. Durable in use. Mold-lock pressure is balance. No deformation. Ball linear guide rail. It is high precision, low resistance and high speed.
6. Blow pin holder: The whole triangle blow pin holder. Steady and no moving. Make sure the smoothness of the cutter of product.
7. Clamping unit and mold-lock system use the TONGDA patent: Two pull rod, single cylinder, two-way synchronous clamping central mold-lock system. It is very steady. Linear ball rolling guide way and microns accuracy. High precision, convenience, energy saving and no deformation.
8. Deflashing system: Independent system. Reduce the cycle time and increase efficiency.
Model | / | HTSII-3L |
Max.Product Volume | (L) | 0.35 |
Station | / | Double |
Dry cycle | (pc/h) | 800*2 |
Screw Diameter | (mm) | 80 |
Screw L/D ratio | (L/D) | 25 |
Screw drive power | (KW) | (22)30 |
Screw heating power | (KW) | (12.7)17.6 |
No.of heating zone (Screw) | (ZONE) | (3)4 |
Output of HDPE | (kg/h) | (80)110 |
Hydraulic pump driving power | (KW) | 11 |
Clamping force | (KN) | 80 |
Platen distance | (mm) | 160-320 |
Mold moving stroke | (mm) | 500 |
Max.Size of Mold | (W*H) (mm) | 490*250 |
Central distance of Hexa diehead(Quad diehead) | (mm) | 70(100) |
Max.Die diameter (Bi-head) | (mm) | 30(45) |
No.of heating zone (Bi-head) | (ZONE) | 13(9) |
Heating power (Bi-head) | (KW) | 11(9) |
Blowing pressure | (Mpa) | 0.6 |
Air consumption | (M3/MIN) | 0.4 |
Cooling water pressure | (Mpa) | 0.2-0.3 |
Water consumption | (L/MIN) | 80 |
Size of machine | (L*W*H)( m) | 3.2*2.7*2.5 |
Weight of machine | (TON) | 8 |