1. Electric system: Mitsubishi PLC system and human-machine interface control(Chinese & English language). Touch screen operation. Setting parameters , changing parameters, searching, monitoring, fault diagnosis and other functions are done by the touch screen. Components are durable.
2. Hydraulic system: Proportional pressure control. Using international famous hydraulic components. It is steady and reliable.
3. Plasticizing system: High efficiency of plasticizing mixing screw. Make sure the plasticizing fully and evenly.
4. Speed control system: Variable-frequency speed control and alloy steel hard tooth-face speed reducer. Speed control steadily. Low noise. Durable in use.
5. Clamping and mold-moving system: The girder arm, tripod position, central mold-lock clamping unit. Durable in use. Mold-lock pressure is balance. No deformation. Ball linear guide rail. It is high precision, low resistance and high speed.
6. Blow pin holder: The whole triangle blow pin holder. Steady and no moving. Make sure the smoothness of the cutter of product.
7. Clamping unit and mold-lock system use the TONGDA patent: Two pull rod, single cylinder, two-way synchronous clamping central mold-lock system. It is very steady. Linear ball rolling guide way and microns accuracy. High precision, convenience, energy saving and no deformation.
8. Deflashing system: Independent system. Reduce the cycle time and increase efficiency.
| Model | / | HTS-12L | HTSII-12L |
| Max.Product Volume | (L) | 12 | 12 |
| Station |
| Single | Double |
| Dry cycle | (pc/h) | 700 | 700*2 |
| Screw Diameter | (mm) | 70(80) | 90 |
| Screw L/D ratio | (L/D) | 25 | 25 |
| Screw drive power | (KW) | 22(30) | 37 |
| Screw heating power | (KW) | 12.7,17.6 | 15.6 |
| No.of heating zone (Screw) | (ZONE) | 4 | 4 |
| Output of HDPE | (kg/h) | 90(110) | 130 |
| Hydraulic pump driving power | (KW) | 15 | 15 |
| Clamping force | (KN) | 158 | 158 |
| Platen distance | (mm) | 240-620 | 240-620 |
| Mold moving stroke | (mm) | 550 | 550 |
| Max.Size of Mold | (W*H) （mm） | 540*550 | 540*550 |
| Max.Die diameter (Single-head) | （mm） | 220 | 220 |
| Die heating power(Single-head) | （KW） | 9.1 | 9.1 |
| No.of heating zone (Single-head) | （ZONE） | 3 | 3 |
| Central distance of Bi-head | （mm） | 240,260 | 240,260 |
| Max.Die diameter (Bi-head) | （mm） | 145 | 145 |
| No.of heating zone (Bi-head) | （ZONE） | 7 | 7 |
| Heating power (Bi-head) | （KW） | 15 | 15 |
| Blowing pressure | （Mpa） | 0.6 | 0.6 |
| Air consumption | （M³/MIN） | 0.8 | 0.8 |
| Cooling water pressure | （Mpa） | 0.3 | 0.3 |
| Water consumption | （L/MIN） | 60 | 60 |
| Size of machine | （L*W*H）（ m） | 3.3*2.3*3.1 | 4.3*2.9*3.1 |
| Weight of machine | （TON） | 7 | 11 |
