Describe:
Features:
01 This machine mechanical, pneumatic, electrical integration. Each action program controlled by the PLC. Touch-screen operation, simple and convenient.
02 servo motors sheet feeding, stepless adjustment of length, speed accuracy and stability. (High Speed 1000mm / s)
03. Electric furnace temperature control system uses intelligent automatic compensation control, a partition using a control voltage, easy to adjust the temperature uniformity, easy to use, simple and fast heating (just five minutes from 0-400 degrees), stable ( influence from external voltage, temperature fluctuations of not more than 1 degree), low energy consumption (15% saving), hearth advantages of long life.
04 up and down twice double electric oven heating (1200m long with a plastic mold when only the upper and lower single-stage heating), and a sheet clip pre-heating device.
05. Early feeding with the heating time automatic memory function, since the first version of the machine can enter the normal working condition.
06. Latency vacuum.
07. The molding, die sets under servo-driven double toggle mechanism, the guide sleeve is inlaid solid lubricating bearings, so that the upper and lower mold under the table smooth and accurate movement, clamping force is conducive to positive and negative pressure molding to improve product quality.
08. Electric furnace automatically removed from the device, disconnect in the middle of the sheet can be produced at any time without stopping and starting, do not waste sheets.
09. The upper and lower mold with electric height adjustment, quick and easy.
10. Using quick die change equipment, pneumatic clamping.
11, the upper and lower mold base mold with auxiliary cylinder. The die holder optional auxiliary stretching cylinder.
12. Forming the flexibility to choose negative, positive, negative pressure in several ways.
13. Mechanical reel device, reduce labor intensity.
Technical parameters:
Adapt sheet width (mm) Suitable Sheet 500-800
Adapt sheet thickness (mm) Thickness 0.3-1.5
Maximum sheet roll diameter (mm) Max Roll Sheet 800
Adapt sheet width (mm) Suitable Sheet | 500-800 |
Adapt sheet thickness (mm) Thickness | 0.3-1.5 |
Maximum sheet roll diameter (mm) Max Roll Sheet | 800 |
On the stroke (mm) Up Mould Stroke | 140 |
Under Stroke (mm) Down Mould Stroke | 140 |
Positive and negative pressure die maximum area (mm2) Max Forming Area | 760 × 750 |
Blister (negative) mold largest area (mm2) Max Forming Area | 760 × 1200 |
Maximum molding height (mm) Max Forming Height | 120 |
Maximum forming depth (mm) Max Forming Depth | 120 |
Operating frequency (beats / min) Capacity (Cycle / min) Max | 25 |
Gas source (outside with) Gas Source gas volume (m3/min) Air Vol. | ≥ 3 |
Pressure (MPa) Pressure | 0.8 |
Water Consumption Water Consumption | 4-5 Cube / Hour |
Vacuum Pump Vacuum Pump | Busch R5 0100 |
Power | three-phase four-wire 380V / 220V 50Hz |
Heating power (kw) | 87.6 |
Motor power (kw) | 17.5 |
Machine maximum power (kw) | 109 |
Maximum dimensions (L × W × H) (mm) | 7800 × 1800 × 2600 |
Total Weight (kg) Weight | 7800 |
Technical configuration:
Programmable Logic Controller (PLC) | Taiwan Delta |
10.4 inches color touch screen Touch Screen Monitor (10.4 "inch / Color) | Taiwan Delta |
Sheet feeding servo motor (3kw) Feeding Motor | Taiwan Delta |
The mold servo motor (4.5kw) Up mold servo | Taiwan Delta |
Lower die servo motor (4.5kw) Down mold servo | Taiwan Delta |
Stove plate (168) Heater | Germany |
Solid State Relays Solid Voltage Regulator | China |
AC contactor | Germany Siemens |
Thermal relay | Germany Siemens |
Intermediate relay | Germany Weidmuller |
Vacuum pump (1 set) | Busch R5 0100 |
pneumatic components | Japan SMC |
Cylinder | CHINA |