Advantage
1. The whole machine adopts aluminum alloy structure, which is more beautiful and sturdy
2. High stability
3. Two output lines for high output
4.Fully automatic outer ear spot welding machine produces masks sheet and outer ear welding spot welding part at the same time, which can save labor. Once the non-woven fabric material is used up in the production process, the machine will automatically stop.
production line structure
A host (masks forming machine) plus two ear band welding machines (outer ear bands) are connected by a one-to-two transmission line. It can achieve the full-automatic production process from coil feeding, folding and pressing, and slitting, ear band feeding machine welding, and unloading.
Technical parameter
Machine model | GC-1950-2 |
Output | 75-100 pieces/min |
Voltage | 220V/50hz |
Machine dimension | 6400*3200*1680mm ((L*W*H) |
Mask size | 17.5*9.5cm |
Power | 11KW |
Weight | 1700Kg |
(Main machine configuration sheet)
1、The one-to-two full-automatic flat masks production line adopts advanced design. It only needs to place the raw materials on the feeding rack. After the modulation is completed, the machine can automatically produce. Only one person needed to operate the packaging, which fully realizes the entire automated production. The equipment adopts ultrasonic welding method, with beautiful appearance, sanitation and environmental protection
The output is 75-100 per minutes, the length of the nose bridge strip is adjustable, and the product size error is fluctuating to 1 millimetre. According to the needs of replacing some molds, a variety of masks sheets can be achieved. This machine can produce non-woven masks, smooth cloth masks, gauze masks, activated carbon masks, double nose line masks, etc. Support 1-5 layers of non-woven masks sheet production.
2、Host technical parameter
设备尺寸: Dimension | 3345*630*1830mm |
电压: Power | AC 220V,50-60HZ |
生产效率: production efficiency | 80~100 片/分 80-100 pieces/min |
功率: Power | 2.7KW |
3、配置单:Configuration list
耳带点焊部分配置单: Ear band welding machine
Ultrasonic welding method is adopted to fuse the elastic band to the inner side of both ends of the mask body, which is the last processing procedure of the inner ear mask production. Only one operator needs to place the mask body piece by piece in the mask plate, and the equipment will automatically complete the following actions until the finished product.
This machine adopts servo step drive,drive accurate, speed adjustable
2、Technical parameter
Machine dimension | 1915*855*1780mm |
Votage | AC 220V,50-60HZ |
Production speed | 50-60 pcs/min |
Power | 2.7KW |