
Waste Plastic Centrifugal Dryer Description
* This plastic centrifugal dryer is a necessary part in the washing line of PP PE or PET bottles.
After crushing and washing, the humidity in the material will be removed by this dewater machine to keep the final moisture content within 3~5%.
* When the material is fed into the dewatering machine, the shaft with about 1500 rpm throws the material outwards against the mesh screen. Water will be removed and the material will go to next step.
* It can also be used for drying the plastic granules in the final step of plastic pelletizing line.
Waste Plastic Centrifugal Dryer Main Parameter
Main motor power (KW) | 4 /5.5 /7.5 /11 / 15 |
The push screw motor power (KW) | 1.5 |
Rotating speed (rpm) | 1500 |
Blade thickness (mm) | 6 |
Rotor diameter (mm) | 450 / 550 |
Mesh diameter (mm) | 3 |
Mesh thickness (mm) | 2 |
Capacity (kg/hr.) | 300-1000 |
Waste Plastic Centrifugal Dryer Features:
1. High speed rotary speed (nearly 1500RPM) ensure the final moisture<5%.
2. There is blowing system behind the dewater machine to suck the material into silo storage which save energy.
3. Rotor, mesh screen and cover are all made by Stainless steel.
4. Inside rotor is special design as hexagon with better effective.
5. The door of machine is easy to open for check and clean the inside.
6. Bottom with drain system for drain out the dirty water.
Waste Plastic Centrifugal Dryer Inquiry:
liuwei@plummytech.com / louis2008beijing@hotmail.com
Wechat/WhatsApp/Telegram:+86-15995994564
www.plummytech.com
arb.plummytech.com
fr.plummytech.com
ru.plummytech.com
pt.plummytech.com
thai.plummytech.com
turkish.plummytech.com
es.plummytech.com
ir.plummytech.com
il.plummytech.com
vn.plummytech.com