- Application:
It is suitable for stranding more than 7-19 copper, aluminum, core wires, electronic wires, power wires, network wires, etc.
- Main Components
|
2.1
|
Pay-off(customer provide)
|
|
|
2.2
|
1+6+12 Double foaming wire plate
|
1 unit
|
|
2.3
|
Double pulley equitensor straighten device
|
1 unit
|
|
2.4
|
Φ800 Buncher
|
1 unit
|
|
2.5
|
Electric control system
|
1 unit
|
3, Equipment configuration
3.1 Pay-off(customer provide)
3.2 1+6+12 Double foaming wire plate
3.2.1 After all wires are released from the pay-off, they enter the distribute plate through a group of guide wheels, and then enter the eye mold for stranding.
3.2.2 Specification of input wire eye mold: (outer circle) Ø 25 * (height) 15 inner hole( according to customer requirements)
3.2.3 Equipped two foaming wire plate.
3.3Equipped double pulley equitensor straighten device:1 set
3.3 Φ800 high speed buncher
1) Model:
Right head: The person faces the front of the machine, and the wire enters the machine from the right side of the machine.
2) Bow rotation speed: Max: 1200RPM. The bow is a guide wheel type.
3) Laying length: 22.51mm-152.32mm (can be adjusted appropriately according to customer needs), manual gear type change of twisting length.
4) Calculation of stranded wire length: MPM= Ptich* 2/1000 * RPM
5) Twisting direction: S or Z
6) Input wire diameter: Ø0.35mm-Ø4.0mm
7) Stranding diameter: Ø1.85mm-Ø15.0mm (max 16mm2 for copper wire and 25mm2 for aluminum wire).
8) Traverse: German-style bearing polished rod arrangement and adjusted.
9) Main shaft lubrication: manual grease gun to fill in oil.
10) Drive motor: AC 440V 1400RPM 15HP Shanghai Jinzhengcheng motor + Inovance inverter stepless speed regulation.
11) Braking: electromagnetic brake, automatic braking when internal and external broken wire.
12) Broken wire protection: If the internal or external disconnection, the machine will automatically stop and alarm.
13) Jog: PLC touch screen display.
14) Speed display: PLC touch screen display.
15) Electrical control: Inovance PLC control system, and the touch screen is Inovance. Parameter setting and operation are all set through the PLC touch screen control panel.
16) External power cord: The external power cord is pulled by the user to the electric control box.
17) Alam light: two-color.
18) Meter counter: PLC touch screen display.
19) Electrical components: Select domestic and international high-quality brands.
20) Bearings: Use imported bearings from Japan, Germany, etc. (such as KOYO; NSK; FAG).
21) Internal parts of the machine: Select domestic and international high-quality brands.
22) Machine noise: below 75dp, measured at a distance of 1000MM.
23) Ambient humidity: cannot exceed 90%. If it exceeds, please blow dry first and then turn on the machine.
24) Workshop temperature: cannot exceed 40℃. If it exceeds, the inverter will automatically trip for protection.
25) Box color: blue (according to customer requirements)
3.4 Take-up structure:
1) Take-up bobbin: Standard: (OD) Ø800* (outer width) 600* (inner hole) Ø80, the extraction pin hole is Ø40, and to distance from the shaft hole, The max center is 160mm and the min is 120mm (the take-up can also be customized according to customer requirements).
2) Tension: 5KG magnetic powder clutch is used to automatically control the tension.
3) Bobbin loading and unloading: electric lifting
3.5 Electric control system:
3.5.1 380V 50Hz, 3 phase, 5 wire, single phase 240V.
4. Spare parts:
|
5.1
|
All pitch gear(full set corresponds to the pitch table)
|
1 set
|
|
5.2
|
Sdjustable wrench
|
1 pc
|
|
5.3
|
Allen wrench
|
9 pcs
|
|
5.5
|
Butter gun
|
1 pc
|
|
5.6
|
Cross screw driver
|
1 pc
|
|
5.7
|
Shockproof rubber pad
|
4 pcs
|
|
5.9
|
Instruction manual and circuit diagram
|
1 copy
|
