Some of the important features:
Clamping system: Faster response, stable and high rigidity
Injection system: Accurate and flexible, lower rejection rate
Control system: Computer and simple operation,molding data memory system
Power system: Energy saving, high efficient and precise
Metal parts: The thickness of our frame, metal plate and wallboard are thicker than other company.
Other Information
Show High Precision: The accurate injection positioning,pressure, speed and pressure maintaining,to ensure the repeatability error of injection accuracy less than 0.3% to achieve precision molding.
Super EnergySaving Features: Compared with standard injection machine,the energy saving rate can reach 40%-70% for the same plastic production.
High Efficiency: Compared with standard machine,the total efficiency can increase by 10% and dragging capacity is can increase by18%.
High Response System:The system acceleration and deceleration performance is quite agile and force&speed regulation is very sensitive.The sampling processing speed can reach 100KHZ and system quick start time can reach 0.05s.
Maintain Stability and Reliability:The pressure or speed is stable and switch of pressure maintaining is smooth and accurate.
Low Oil Temperature:Avoid high pressure unloading and low oil temperature situation during operation.Improve the operation performance.promote using efficiency and save a large quantity of cooling water.
| INTERNATIONAL CLASS NO | 1420/11580 |
| U STYLE SPECIFICATION | V/1420W |
| Screw type | Unit | A | B | C | D |
| Injection Unit |
|
| Screw diameter | mm | 110 | 120 | 130 | 140 |
| Screw L/D ratio | L/D | 25.2 | 23 | 21.3 | 19.8 |
| Shot volume(therretical) | cm 3 | 5559 | 6616 | 7765 | 9004 |
| Injection weight(PS) | g | 5059 | 6020 | 7066 | 8174 |
| Injection rate | g/s | 815 | 970 | 1138 | 1320 |
| Injection pressure | M Pa | 208 | 175 | 150 | 129 |
| Screw speed | rpm | 90 |
| Clamping unit |
|
| Clamping force | KN | 14200 |
| Open stroke | mm | 1350 |
| Space between tie-bars(WxH) | mm x mm | 1310X1300 |
| Max mould height | mm | 1400 |
| Min mould height | mm | 600 |
| Ejector stroke | mm | 360 |
| Ejector force | KN | 260 |
| Others |
|
| Max pump pressure | M Pa | 16 |
| Servo system power | KW | 45+45+45+30 |
| Heating power | KW | 86 |
| Numbers of heating area |
| 7+1 |
| Machine demension(LxWxH) | m | 15.2X3.00X4.13 |
| Oil tank cubage | L | 2900 |
| Machine weight | t | 99 |
| Remarks:The company reserves the right to modify the specification parameters without notice. |
|
|
|
|
|
|
