Squeeze Dryer
Application and technical parameters
The Dryer applies to dewater the polymeric film .The water content of materials shouldn’t exceed 50%. the percentage of moisture content will less than 10% after process. this machines is highly energy saving design, work efficiently with less electricity consumption . It can work alone ,or work as a part of production line .the main technical parameters of the Dryer are shown in table1
Table1 – technical parameters of dryer
№ | Property | Value |
1 | Voltage, V | 380+10%-15% |
2 | Current frequency, Hz | 50±1 |
3 | productivity(decide on materials),kg/h | 600 |
4 | Screw dimension (taper), mm |
|
5 | Screw revolving speed, rpm | 32 |
6 | Rated power, kw: - electric cabinet | 75 |
7 | Outline dimension of main engine,mm: - length - width - height electric cabinet outline dimension, mm: -length - width - height | 2883 2065 1980 800 385 1500 |
8 | Weight (without electric cabinet),kg, less than | 5000 |
Associated equipment
table2–associated equipment of dryer
№ | Name | quantity |
1 | Screw dryer | 1 |
2 | Electric cabinet | 1 |
3* | Wrench | 2 |
4* | set of blanking claw (3)* | 1 |
5* | Sleeve lath* | 4 |
6* | Feeding hopper | 1 |
7* | Bearing 1222K+H222 GB/T 281-1994 (11220 ГОСТ 28428-90)* | 1 |
8* | Bearing52220 GB/T 301-1995 (38220Н ГОСТ 7872-89)* | 1 |
9* | Triangle belt SPC-2650 GBT-11544-1997* | 5 |
10* | Cutter on cone head (picture1, accessory B) | 1 |
11 | Cutter on cone head (picture2, accessory B) | 1 |
The parts with mark * are included in the Dryer, those opitons have been default installed。