Plastic Pipe Production Line
Plastic pipe extrusion production line is mainly used for continuous extrusion molding of PVC, polyethylene and PP plastic rigid pipes and cold bent pipes; the series of unit integrates extrusion, cooling sizing, traction, cutting and unloading, and is featured by high automaticity, good plasticization, long life, etc.
Main Technical Parameters
Matched engine model | SJSZ80 x 22Conical Double Screw Extruder | SJSZ60*22 Conical Double Screw Extruder | SJSZ45*23 Conical Double Screw Extruder | SJ90*25 Single Screw Extruder | SJ65*25 Single Screw Extruder | SJ45*25 Single Screw Extruder |
Production pipe diameter | ф 160 –ф315 | ф 50 –ф250 | ф 25 –ф110 | ф 50 –ф160 | ф 16 –ф 75 | ф 16 –ф32 |
Sizing method | Vacuum sizing or inner diameter sizing |
Vacuum pump power | 7.5 | 5.5 | 4 | 4 | 3 | 1.5 |
Cooling model | Spray water cooling | Spray water cooling | Spray water cooling | Drenching water cooling | Immersion | Immersion |
Cooling trough length | 6000 – 10000 | 6000 | 4000 – 6000 | 4000 – 6000 | 6000 – 10000 | 6000 – 10000 |
Traction mode | Caterpillar tractor | Caterpillar tractor | Caterpillar tractor | Caterpillar tractor | Caterpillar tractor | Roller tractor |
Pulling speed | 0.3 – 3 | 0.3 – 3.0 | 0.3 – 5 | 0.3 – 3.0 | 0.3 – 5.0 | 0.5 – 5.0 |
Cutting power | 5.5 | 2.2 – 3.0 | 2.2 | 1.5 – 2.2 | 1.1 – 2.2 | 1.1 |
Cutting mode | Planetary sawing machine | Planetary sawing machine | Circular sawing machine | Circular sawing machine | Circular or manual sawing machine | Manual sawing machine |
Cutting power | 3 | 2.2 | 1.5 | 1.1 | 1.1 | 0.75 |
Mass | 9000 | 7500 | 7000 | 6000 | 4000 | 25000 |
erall dimensions/m*m*m: L*W* H | 25x2.5x3 | 18x2.2x2.9 | 17x2x2.7 | 16x2.2x1.9 |
|
|
Key words :