The 2L-16Lstation blow moulding machineis different from the single station machine in that it has one additional station with high-precision linear guide, covering four major series of DHD-2L-A,DHD-5L-A,DHD-10L-A and DHD-16L-A. The same as the single station machines, it can be used to produce a wide variety of materials, such as PE, PP, and PA. The largest capacity of the product can be 16L, and its production capacity is 60 to 70% more than the single station machine. In accordance with different type of products, die heads can be changed to achieve multi-type production.
Setting:
Clamping------------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system----------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
Advanced processing equipment:
Introducing advanced technology form Germany,Italy,Japan etc.
Involving advanced design and production of super large-scale blow-molding machine and engineering management capability.
Holding over 40 items Patent Technologies.
After sales service:
With good brand reputation and attitude of customer-centric, we invite special technologists responsible for after sales.
Service hotline is 24-hour on call.
Fast response: domestic call is handled within 12 hours.
International call is handled within 20 hours.
Specification |
| DHD-2L-A | DHD-5L-A | DHD-10L-A | DHD-16L-A |
Material |
| PE、PP… | PE、PP… | PE、PP… | PE、PP… |
Max.container capacity | L | 2 | 5 | 10 | 16 |
Number of die | set | 1、2、3、4 | 1、2、3、4 | 1、2、3、4、6 | 1、2、3、4、6 |
Output(dry Cycle) | pcs/hr | 950*2 | 750*2 | 700*2 | 600*2 |
Machine Dimension | m | 2.9×2.1×2.6 | 3.6×2.3×2.6 | 4.1×2.5×3 | 4.5×2.7×3.1 |
Total weight | ton | 4 | 6.5 | 9.5 | 11 |
Accumulator head |
| DHD-2L-A | DHD-5L-A | DHD-10L-A | DHD-16L-A |
Number of die heating | zone | 3 | 3 | 3 | 4 |
Power of die heating | KW | 4.2 | 5.8 | 6-7 | 6-7 |
Max die-pin diameter | mm | 60 | 80 | 140 | 140 |
Center distance of twin-die | mm | 130 | 160 | 240 | 260 |
Center distance of tri-die | mm | 85 | 110 | 160 | 180 |
Center distance of four-die | mm | 65 | 85 | 120 | 130 |
Center distance of six-die | mm |
|
| 85 | 90 |
Clamping Unit |
| DHD-2L-A | DHD-5L-A | DHD-10L-A | DHD-16L-A |
Clamping force | KN | 38 | 70 | 110 | 155 |
platen opening stroke | mm | 120-390 | 135-530 | 220-610 | 220-620 |
platen size | mm | 290×330 | 330×400 | 460×500 | 520×480 |
Max mould size | mm | 310×330 | 350×400 | 520×500 | 600×480 |
Mould thickness | mm | 120-220 | 140-300 | 235-380 | 235-380 |
Extruder Unit |
| DHD-2L-A | DHD-5L-A | DHD-10L-A | DHD-16L-A |
Screw diameter | mm | 60 | 70 | 90 | 90 |
Screw L/D ratio | L/D | 24:1 | 24:1 | 25:1 | 25:1 |
Extruding Volume | Kg/hr | 60-80 | 100-120 | 130-160 | 130-160 |
Number of heating zone | zone | 3 | 3 | 4 | 4 |
Extruder heating power | KW | 5-6.6 | 6-8.2 | 8.2-9.3 | 8.2-9.3 |
Extruder driving power | KW | 15-18.5 | 22-37 | 37-45 | 37-45 |
