JLM90-1200 Paper And plastic Coating Machine
Introduction:
This equipment is mainly used for roll based papers’ surface coating and laminating process, such as paper cup ,paper dinner ware,packing paper and so on.
Main technical parameter:
1. Screw and barrel: diameter 90mm, L/D:32:1, material: 38CrMoAl,hardness treatment, surface with Nitride,with a special section of mixing, mixing well, big extruding capacity;
2. “T” shape stretchy mould: new type featheredge mould,Material: 5CrNiMoV, surface with chrome treatment, excellent in toughness and hardness, be not out of shape with high temperature frequently ;
3.The gear box of extruder motor adopts high strength hard teeth retarder with high obturation;
4.Intellectualize digital corona treatment;
5. Range: 50gsm ~ 250gsm roll paper with surface coating;
6.Coating material: squeeze complex level PE,PP;
7.Coating width : 1100~1500mm;
8.Thickness of coating: 0.012~0.070mm(single layer);
9.Symmetrical degree of coating: +6%;
10.Peel off strength: 3-5N/30mm(according to the coating basic material);
11.Max extruding capacity: 220kg/h;
12.Machine design speed: 0~150m/min;
13. Unwinding system uses a two-axle duplex-rollover broadcasting form, cutting and changing rollers without lower the speed, tension with the most advanced vector frequency conversion motor control (PLC module control) technology, correction system uses a car-type automatic correcting device (EPC), warp tour:±100 mm,rectifying precision:±0.5 mm,Max winding diameter:1200mm ;
14.Friction winding, max winding diameter:1200mm;
15. .Pneumatic roller for unwind and rewind:3 inch (φ73mm);
16.Total power: about 150 Kw;
17. Size (L×W×H): 9500mm×8200mm×3200(mm);
18.Total weight: about 20000kg.