Polyethylene pipe low cost solutions, the equipment can make 90mm diameter 315mm to the angle of bend, tee, diameter four-way dozens of pipe fittings, making 45 DEG and 60 DEG Y-shaped tee (optional Y type fixture), but also for the production of complex pipe assembly (narrow selection of fixture and flange clamp, etc.).
Equipment through the EU CE certification; the main electrical components are all using ABB, Schneider or SIEMENS components; the main hydraulic valve parts manufactured in Taiwan, reliable and stable performance.
Can choose automatic touch screen control cabinet, automatic welding.
Technical Parameters：
Equipment model | SHG315 |
Applicable material | PE，PP |
Can make the largest diameter of elbow | 315 mm |
Maximum three pass outside diameter can be made | 315 mm |
Maximum four pass outside diameter can be made | 315 mm |
Can make the largest Y type pipe fitting outside diameter (need to be equipped with another fixture) | 315 mm |
Applicable ambient temperature | －5～45℃ |
input voltage | ～380V±10% |
frequency | 50 Hz |
Total current | 12.75A |
Total power | 7.25KW |
Among them: heating plate | 5KW |
Planning tool | 1.5KW |
Hydraulic unit | 0.75KW |
Packing cases | 4 pcs |
Whole to ground insulation resistance | >1MΩ |
Maximum working pressure | 6 MPa |
Cylinder piston area | 12.56 cm2 |
Surface coating maximum temperature resistance | 270℃ |
Surface temperature difference of heating plate | ±7℃ |
noise | ＜70 dB |
Tank volume | 55L |
Hydraulic oil | 40～50mm2/s |
Total weight, kg | 760 kg |
